Features

• Industry certified to meet NSF / ANSI 42 or 401 standard, Swift Green Rx using advance scientific purification process reduces chemicals, including pharmaceuticals, Volatile organic compounds (VOC), Chlorine Taste & Odor (CTO), pesticides, waterborne parasites, lead, Cyst mercury, asbestos, chlorine, and other industrial chemicals
• Made in the U.S.A using ONLY certified NSF/ ANSI lab tested raw material for its quality & performance. “100% Guarantee for Highest Performance in its class and Capacity in the Industry”. Buy with confidence. Our Raw Material are BPA, Lead, Arsenic-free
• Our mission is to Save Health !! Great alternative to expensive refrigerator branded filters. Does not remove minerals which may be beneficial to health
• 100% satisfaction guarantee; Outstanding quality; Easy filter replacement; DIY, no tools required to replace this water filter. Replace every 3- 6 months for best performance.
• The Eco-friendly filter uses coconut shell carbon ( Renewable Resource), the earth’s most powerful natural filter while keeping plastic water bottles out of our landfills water.

TECHNICAL SPECIFICATIONS

• Max. Operating Temperature: 38C/100F
• Min. Operating Temperature: 0.6C/33F
• Max. Working Pressure: 689kPa/100ps
• Min. Working Pressure: 140kPa/20psi
• Capacity VOC: 300 gallons
• Capacity CTO: 2000 gallons
• Flow Rate: 1.9 lpm/0.5 gpm

HOW TO INSTALL Swift Rx’s SGF-M9-Rx

1. Locate your refrigerator's purifying housing unit. This is typically found in the upper right-hand corner inside of your refrigerator/freezer.
2. Open the housing cover. The housing cover will use one of two types of release options: push or pull.
   • Push release: a push release will have a tab in front of the housing. Simply push the tab to release the hatch of the housing.
   • Pull release: a pull release style housing has a slightly harder to detect opening mechanism. It uses a tab that sits inside of a recess on the front underside of the housing unit. Find the recessed tab with your fingers then pull forward to release the latch.
3. Remove the old unit from its housing. To do this, turn it counterclockwise (should only take a quarter turn), then pull it straight out.
4. Install the new unit. Insert the new one and turn clockwise until snapped in tight.
5. Flush it. You will need to run approximately 2-4 gallons of water through the new purifier before it is ready for use. This will take approximately 5 minutes.
6. Reset your change notification. The instructions in the owners' manual will tell you how to reset the notification so that it can alert you when your new purifier needs to be changed.

INSTALLATION VIDEO